manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 67 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 67

Chapter 4 SMP log error messages

67

System Messaging Platform Reference Guide

 

Message

Could not start portMgr Task , <value>,

Severity

FATAL

Description

This message indicates the portMgr task could not be created.

Synopsis

N/A

Action

Reboot the switch and contact the customer support team if the problem persists.

Message

cpp2LargeFbufInit: Can't allocate memory!

Severity

FATAL

Description

This message is generated when the system could not allocate memory for FBUF 
which is used to either transmit or process large received packets. This means the 
system will not be able to perform receive or transmit functions.

Synopsis

N/A

Action

Reboot the switch and contact the customer service team if the problem persists.

Message

cppAddDefaultRouteHook: ifAddrSet failed!

Severity

ERROR

Description

This message is generated when the registration of the CP interface with vxWorks 
has failed. Any communication with the vxWorks IP stack will also fail.

Synopsis

N/A

Action

Reboot the switch and contact the customer support team if the problem persists.

Message

cppAddDefaultRouteHook: ifFlagChange failed!

Severity

ERROR

Description

This message is generated when registration of the CP interface with vxWorks 
fails. Any communication with the vxWorks IP stack will also fail.

Synopsis

N/A

Action

Reboot the switch and contact the customer support team if the problem persists.

Message

cppAddDefaultRouteHook: ifMaskSet failed!

Severity

ERROR

Description

This message is generated when registration of the CP interface with vxWorks 
fails. Any communication with the vxWorks IP stack will also fail.

Synopsis

N/A

Action

Reboot the switch and contact the customer support team if the problem persists.

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments