Nortel 8300 Series Reference Manual Download Page 159

Page: 159 / 220

Chapter 4 SMP log error messages

159

System Messaging Platform Reference Guide

Message

rad_handleServerResponse select failed<num>

Severity

ERROR

Description

This message identifies an internal error in the software

Synopsis

Software error.

Action

If the problem persists, contact customer support.

Message

rad_incrIgapEnabledVlanCnt failed to allocate memory

Severity

ERROR

Description

This message indicates that the system is out of memory.

Synopsis

Insufficient memory.

Action

If the problem persists, contact customer support.

Message

rad_NewRequest: no radius server configured

Severity

INFO

Description

This message indicates that no RADIUS server has been configured.

Synopsis

N/A

Action

Configure at least one RADIUS server.

Message

rad_newSocket cannot bind UDP socket to port<num>

Severity

ERROR

Description

This message indicates that an attempt to bind to the specified UDP port failed.

Synopsis

UDP port specified is already in use.

Action

Ensure that no other UDP service is configured on the same port. If the problem
persists, contact customer support.

Message

rad_newSocket cannot create UDP socket

Severity

ERROR

Description

This message indicates that an attempt to create a UDP socket failed.

Synopsis

Software error.

Action

Contact customer support

Summary of Contents for 8300 Series





























































































































































































































Search results

Summary of Contents for 8300 Series

Reviews:

Nortel 8300 Series, Reference Manual, Page: 159 / 220

Search results

Summary of Contents for 8300 Series

Reviews: