Nortel 8300 Series Page 160 Reference Manual Download

Page: 160 / 220

160

Chapter 4 SMP log error messages

316806-C

Message

rad_newSocket failed to allocate memory

Severity

ERROR

Description

This message indicates that the system is out of memory.

Synopsis

Insufficient memory.

Action

If the problem persists, contact customer support.

Message

rad_receiveResponse received response with bad length recvd<num>

Severity

ERROR

Description

This message indicates an invalid length for the received RADIUS response
packet.

Synopsis

The packet size of incoming RADIUS response must be equal to the size
mentioned in the packet header.

Action

Verify that the RADIUS server is functioning correctly. If the problem persists,
contact customer support.

Message

rad_receiveResponse recvfrom failed<num>

Severity

ERROR

Description

This message indicates that the switch is unable to receive data on the UDP
socket.

Synopsis

Software error.

Action

Contact customer support.

Message

rad_Request failed to allocate memory

Severity

ERROR

Description

This message indicates that the system is out of memory.

Synopsis

Insufficient memory.

Action

If the problem persists, contact customer support

Message

rad_Request Unknown request type<num>

Severity

ERROR

Description

This message identifies an internal error in the software.

Synopsis

Software error.

Action

If the problem persists, contact customer support.

Summary of Contents for 8300 Series





























































































































































































































Search results

Summary of Contents for 8300 Series

Reviews:

Related manuals for 8300 Series

Brands by name

Popular brands

Nortel 8300 Series, Reference Manual

Search results

Summary of Contents for 8300 Series

Reviews:

Related manuals for 8300 Series

Brands by name

Popular brands