manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 103 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 103

Chapter 4 SMP log error messages

103

System Messaging Platform Reference Guide

 

Message

image programming done 

Severity

INFO

Description

This message specifies that image programming was completed during the image 
upgrading process.

Synopsis

N/A

Action

N/A

Message

image programming started, .... 

Severity

INFO

Description

This message specifies that image programming to the PoE DIMM controller 
module has started.

Synopsis

N/A

Action

N/A

Message

indexAdd() - failed adding

Severity

ERROR

Description

This message indicates that an error occurred when adding a policy entry in which 
the entry exists.

Synopsis

N/A

Action

N/A

Message

Insertion of card failed for Slot <value> !

Severity

WARNING

Description

This message indicates the card insertion process was unsuccessful.

Synopsis

N/A

Action

Re-insert or replace card.

Message

Invalid Card Type

Severity

WARNING

Description

This message specifies that an invalid card type was detected.

Synopsis

N/A

Action

N/A

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments