manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 185 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 185

Chapter 4 SMP log error messages

185

System Messaging Platform Reference Guide

 

Message

rcIpVlanSetIpAddress: ipCircCreate failed for <value> IfIndex <value>

Severity

ERROR

Description

This message is generated if an IP interface could not be created with the given 
index.

Synopsis

Unable to create an IP interface.

Action

This is an internal software error. Contact customer support for further 
troubleshooting.

Message

rcIpVlanUp: cppAttach failed for IfIndex <value> cid <value>

Severity

FATAL

Description

This message is generated when updating VLAN info. It is caused by the failure to 
attach the IP record to the vxworks due to either memory being unavailable, or the 
maximum number of devices being utilized.

Synopsis

Unable to attach the IP record to the vxworks.

Action

Contact customer service and have the following information available for further 
analysis: system logs including any memory dumps, switch configuration, and 
network topology.

Message

rcIpVlanUp: ifAddrSet failed for IfIndex <value> cid <value>

Severity

FATAL

Description

This message is generated when setting the interface address fails.

Synopsis

Unable to set the interface address.

Action

Contact customer service and have the following information available for further 
analysis: system logs including any memory dumps, switch configuration, and 
network topology.

Message

rcIpVlanUp: ifMaskSet failed for IfIndex <value> cid <value>

Severity

FATAL

Description

This message is generated when setting the mask for the IP address record fails.

Synopsis

Unable to set the mask for the IP record.

Action

Contact customer service and have the following information available for further 
analysis: system logs including any memory dumps, switch configuration and 
network topology.

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments