Nortel 8300 Series Page 213 Reference Manual Download

Page: 213 / 220

Chapter 4 SMP log error messages

213

System Messaging Platform Reference Guide

Message

Vlan id -- returned from RADIUS server cannot be used for tagged port --

Severity

INFO

Description

This messages is generated when the system tries to move the 8021x authorized
port to VLAN returned by RADIUS server and the port is tagged.

Synopsis

System attempts to move 8021x authorized tagged port to VLAN returned by
RADIUS server

Action

Make the port untagged

Message

Vlan Table synch consistency check failed, expected_size:<value>,
given_size:<value>\n,868, sizeof(tVlanTblSyncEntry)

Severity

INFO

Description

This message is generated when the consistency check failed. Received
message size from the Master is different than expected.

Synopsis

N/A

Action

N/A

Message

Vlan Table synch size from master CPU incorrect, expected_size:<size>,
given_size: <given size>

Severity

ERROR

Description

This message is generated when the statistics received from the master are
different than expected.

Synopsis

N/A

Action

N/A

Message

vlanCreateVirtualLan: Out of memory! for Vid <value> NumVlans
<value>,VlanId,NumVlans

Severity

ERROR

Description

This message is generated when the system is out of memory.

Synopsis

N/A

Action

Free some space.

Summary of Contents for 8300 Series





























































































































































































































Search results

Summary of Contents for 8300 Series

Reviews:

Related manuals for 8300 Series

Brands by name

Popular brands

Nortel 8300 Series, Reference Manual

Search results

Summary of Contents for 8300 Series

Reviews:

Related manuals for 8300 Series

Brands by name

Popular brands