manualshive.com logo in svg

Nortel 8300 Series, Reference Manual, Page: 141 / 220

Share
Download
Nortel 8300 Series Reference Manual Download Page 141

Chapter 4 SMP log error messages

141

System Messaging Platform Reference Guide

 

Message

portVctDoTest: Could not get the Result in WA. gtStatus not OK: <value>

Severity

ERROR

Description

This message indicates that the result could not be obtained from the VCT test.

Synopsis

N/A

Action

Perform the test again.

Message

portVctDoTest: Could not get the Result. gtStatus not OK: <value>

Severity

ERROR

Description

This message indicates the result could not be obtained from the VCT test.

Synopsis

N/A

Action

Perform the test again.

Message

portVctDoTest: Could not start the test in the WA. gtStatus not OK: <value>

Severity

ERROR

Description

This message indicates that the VCT test could not be performed. 

Synopsis

N/A

Action

Perform the test again.

Message

portVctDoTest: Could not start the test. gtStatus no OK: <value>

Severity

ERROR

Description

This message indicates the VCT test could not be performed.

Synopsis

N/A

Action

Perform the test again.

Message

portVctDoTest: Could not write 0x2 into Reg30)

Severity

ERROR

Description

This message indicates that the information could not be written into the register 
for the VCT test.

Synopsis

N/A

Action

Perform the test again.

Summary of Contents for 8300 Series





























































































































































































































Reviews:

No comments