Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
Initial setup
63
213455-L, October 2005
7.
Get the interfaces for the Firewall object.
Select the the Check Point Topology dialog box (see
Figure 30
). Click
Get all members’
topology
to retrieve the interfaces you configured on the firewall and the topology information
(under the
IP Addresses behind interfaces
header).
N
OTE
—
The topology information is needed to install Check Point policies on the configured
firewall interfaces.
Figure 30
Gateway Cluster Properties—Topology page
8.
Click OK to close the Check Point Gateway dialog box.
9.
From the SmartDashboard menu bar, select File | Save.