Nortel 5100 Series Release 2.3.3, User'S Manual And Command Reference, Page: 15 / 430

Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
Preface
„
15
213455-L, October 2005
Related documentation
For setup, configuration, software maintenance and release-specific information, see the
following related documentation:
„ Nortel Switched Firewall 5100 Series Hardware Installation Guide (216382-D)
„ Nortel Switched Firewall 2.3.3 Browser-Based Users Guide (216383-D)
„ Nortel Switched Firewall 5100 Series 2.3.3 Release Notes (213456-S)
The documents are available on the Nortel Technical Support web site at
www.nortel.com/support .
Typographic conventions
The following table describes the typographic styles used in this book.
Table 1 Typographic Conventions
Typeface or
Symbol Meaning Example
AaBbCc123
This fixed-width type is used for names of
commands, files, and directories used within
the text.
View the readme.txt file.
It also depicts on-screen computer output and
prompts.
Main#
AaBbCc123
This italicized type shows book titles, special
terms, or words to be emphasized.
Read your User’s Guide
thoroughly.
AaBbCc123
This fixed-width, bold type appears in com-
mand examples. It shows text that must be
typed in exactly as shown.
Main# sys
<AaBbCc123> Italicized type within angle-brackets appears
in command examples as a parameter place-
holder. Replace the indicated text with the
appropriate real name or value when using the
command. Do not type the brackets.
To establish a Telnet
session, enter:
host# telnet
<IP address>
[ ] Command items shown inside square brack-
ets are optional and can be used or excluded
as the situation demands. Do not type the
brackets. host# ls [-a]