
Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
198
Layer 2 and Layer 3 Firewalls
213455-L, October 2005
4.
From the Gateway Cluster Properties menu, select Topology.
The Edit Topology page appears (see
Figure 100
).
TIP
: Check Point cannot identify a pure Layer 2 bridge device because the bridge interface
does not hold a valid IP address.
Figure 100
Edit Topology
5.
To manually add port 3 and 4, click Add Network.
Manually add port 3 and 4 to eth2, eth3 with IP subnet 172.16.5.0/255.255.255.0 (host PC IP
address range).