Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
206
Layer 2 and Layer 3 Firewalls
213455-L, October 2005
Configuring the Check Point software to support a Layer
3 Firewall
Use the following procedure to configure the Check Point software to support a Layer 3
Firewall.
1.
To Configure the cluster to include Switched Firewall, NSF#1 and Switched Firewall,
NSF#2, perform the following steps.
1a) Select
General Properties
from the Gateway Cluster Properties menu.
The Gateway Cluster Properties—General page appears (see
Figure 105
).
Figure 105
Gateway Cluster Properties—General
1b) Type the name of the cluster in the Name field.
1c) Type the address of the cluster in the IP Address field.
TIP
: Click
Get Address
to get the address associated with the name typed in
Step 1b
.
1d) Select the
NGX R60
from the Version list.
1e) Select your operating system from the OS list.
1f) Select the installation type from the Type list.