Nortel Switched Firewall 2.3.3 User’s Guide and Command Reference
382
Event Logging API
213455-L, October 2005
Configure the Firewall
Configuration of the Firewall is performed through the CLI or the Browser-Based Interface
(BBI). The following steps use the BBI method. To configure the ELA using the CLI, see
ELA
Logging Menu on page 315
.
1.
Log on to the BBI using the host IP address.
For more information about the BBI, see
Nortel Switched Firewall 5100 Series Release 2.3.3
Browser-Based Interface User’s Guide
, Part number 216383-D.
2.
Select the Cluster/ELA form and define the general settings (see
Figure 122
).
Figure 122
BBI Cluster/ELA form
To define the general settings on the Cluster/ELA form, set the following parameters:
Set Status to “enabled.”
Set Management Station IP to the IP address of the Check Point management station.
TIP
: Use dotted decimal notation.
Set Minimum Severity if a different level is desired. All messages at the specified level of
severity or higher are logged to ELA.
Set the Server Distinguished Name (see
Step 3
to determine the server DN ).