Symposium and DMS/MSL-100 Switch Guide
51
April 2004
Configuring the switch
Configuring CUSTNTWK
Introduction
The table CUSTNTWK assigns a network ID to a customer group. The network
ID identifies your organization’s network within the telephony environment.
Follow the procedure in this section to configure the ECM option.
Before you begin
Ensure that the network name is defined in table NETNAMES.
To configure the ECM option
1
Edit the CUSTNTWK table by typing table CUSTNTWK and pressing
Enter.
2
Type $ and press Enter.
Result: The OPTIONS prompt appears.
3
You must add ECM to the last entry.
4
Set the following option for use with Symposium Call Center Server:
5
Type Y and press Enter.
6
To exit from the table, type quit and press Enter.
Option
Description
ECM
This option configures the network to receive SCAI messages
from the switch.
Summary of Contents for 297-2183-912
