Nordson Vulcan Jet, Customer Product Manual

Page: 40 / 172

About the Touch Screen and User Interface
4-2
Part 1126187_05
E
2021 Nordson Corporation
Starting the Controller for the First Time
The first time you switch On the controller, the Commissioning Wizard starts,
allowing you to:
S
calibrate the touch screen, as well as define general system default
settings, such as language, time, date, temperature, and pressure
formats
S
define the two heating zone set point temperatures
S
heat the adhesive cartridge to operating temperature
S
perform a stroke adjustment.
NOTE:
S
Make sure to read and follow the instructions on the screen.
S
The Commissioning Wizard should take about 20 minutes to
complete, mostly to wait for the heated zones each their set point
temperatures.
S
You can make changes to these default settings once you are done
with this wizard.
S
The last procedure in commissioning is adjusting the stroke. This
must be done when the controller is in a Ready/OK state.
S
You must Purge the system before using it.