Nordson Vulcan Jet, Customer Product Manual

Page: 91 / 172

Advanced Controller Configuration
6-17
Part 1126187_05 E
2021 Nordson Corporation
Resetting and Clearing the Service Reminders
When either the Seal Pack and/or the Needle Seat assembly have met their
respective maximum number of cycles, a Service Reminder pop-up message
appears and one or more icons appear in the upper right-hand corner of the
Top Status bar, next to the Melter Status icon.
Needle Seat Service Reminder Indicator
Top Status Bar
Seal Pack Service Reminder Indicator
Service Reminder
03/20/2016 22:15
The Seal Pack Cycles has reached the service reminder limit150 million
cycles. Unit is working, but maintenance may be required.
Clear Reset Clear
Melter Status indicator
There are two ways to reset the service interval value:
From the pop-up message
Touch Description
Clear Closes the pop-up message, but the service
reminder condition still exists
A Service Reminder icon appears in the Top
Status bar.
Reset Closes the pop-up message, and resets the
service reminder counter back to 0 (zero). This
assumes that you have performed the required
maintenance.
From the Service Reminders Screen
1. From the Top Status bar, touch . The Service Reminders screen
appears.
2. Touch corresponding to the numbers that are yellow that you want to
reset. This is the item that should have already been replaced.
3. Touch . The following happens:
S
The numbers for the item are reset and now appear blue.
S
The Service Reminder icon is removed from the Top Status Bar