Nordson Vulcan Jet, Customer Product Manual

Page: 65 / 172

Basic Operation and Controller Configuration
5-7
Part 1126187_05 E
2021 Nordson Corporation
Cartridge
Please Insert a new cartridge
Start the Replace/Calibrate Cartridge Wizard by:
S
Clicking YES from the Low Level Alert message
S
Clicking YES from the Adhesive Life Timer Alert message
S
Clicking OK from the Empty message
Navigate through the user interface as follows:
1. From the Home screen, do one of the following:
S
Touch .
S
Touch
Master
, then touch button.
2. Touch System, | Cartridge, then Replace/Calibrate . The controller
changes status from Ready/OK to Heating and the Replace/Calibrate
Wizard starts. Read and follow the instructions on the screen.
3. When the cartridge is ready, the controller changes status from Heating
to Ready/OK and automatically returns you to the Home screen
NOTE:
S
You cannot exit out of this wizard.
S
If you do not use the Replace/Calibrate Cartridge Wizard and if the
adhesive level was more than half empty, then the system will display
a
Do you want to reset the Adhesive Life Timer? Message. If you do
not reset the timer, you may receive false Adhesive Life Timer alert
messages.