Nordson Encore HD iControl System, Hardware Manual

Page: 16 / 93

System Overview
2-4
Part 1603054-02
E 2015 Nordson Corporation
Operator Interface
The iControl software provides a graphical user interface that provides
screens to configure and control the spray gun triggering and positioning
system.
The operator performs all configuration and operation tasks with the touch
screen and the Rotary Dial . Turning the rotary dial increases or decreases
values in selected fields.
3
2
1
Figure 2-3 Master Console Front Panel
1. Interlock keyswitch
2. LCD touch screen 3. Rotary dial
Interlock Keyswitch Functions
In the Ready position, the spray guns cannot be triggered unless the
conveyor is running. This prevents powder waste and hazardous operating
situations.
In the Bypass position, you can trigger the guns on and off without running
the conveyor. Use the Bypass position to set up and test spray gun
settings.
In the Lockout position, the guns and the gun movers are disabled. Use
this position when working inside the booth.
Obsolete