Nogueira PTN-1000 G3, Instruction Manual

Page: 106 / 152

30
Instructions Manual
4. Preparation
1.
Remove the 2 bolts (E) and the cover (F);
2.
Remove the cover (F)
3.
Remove the cutting gears (G);
4.
Remove the box (H);
5.
Remove the 2 bolts (L);
6.
Remove the bearing support “shackle” (T);
7.
Remove the 4 bolts (J);
8.
Pull the support (K) upwards, removing it
from the machine;
9.
Remove the pin (S) and remove the shaft
(U);
10.
Replace the shaft (U) with the splined
shaft (V);
The splined shaft (V) is in the kit
of parts that comes with the platform.
NOTE!