Nogueira PTN-1000 G3, Instruction Manual

Page: 115 / 152

Instructions Manual
39
ALIGNER FINGERS
CENTRAL DEFLECTOR
ENGLISH
4. Preparation
4.4- Mounting the Center Aligner and Aligners on the Head
(New
Pecus / New Pecus G2)
Normally, the aligner fingers and the central
deflector (pictured on the side) leave the head
disassembled from the factory. Mounting is
simple by fixing them with the bolts, washers
and nuts provided with the head.
1.
Fix the 2 aligner fingers with the bolts (A)
and washers (B) (picture on the side).
2.
Fix the central deflector with the bolts
(C), washers (B) and nuts (D) (picture on
the side).
B
E
D
A
C
A = Hex Bolt M10 x 30 mm (04 pcs)
B
= Flat Washer Ø10 mm (04 pcs)
B = Spring Washer Ø10 mm (04 pcs)
W
= Hex Bolt M10 x 75 mm (02 pcs)
D = Spring Washer Ø10 mm (02 pcs)
D
= Flat Washer Ø10 mm (04 pcs)
E = Lock Nut M10 (02 pcs)
The bolts, nuts and washers used
for this mounting are find in the kit
supplied with the head.
NOTE!