Nogueira PTN-1000 G3, Instruction Manual

Page: 120 / 152

44
Instructions Manual
3.
Fit the bottom (D) into the 2 pints (E) of
the tensioner.
4.
Fit the two gears (F).
5.
Fit the sprocket (J) - 16 teeth.
6.
Fit the sprocket (K) - 25 teeth.
7.
Using a ruler, check if the sprockets are
aligned.
8.
If necessary, adjust the height of the
sprocket (J) by changing the number of
shims under it.
9.
After aligning the sprockets, secure them
to the shaft with the bolts and washers (L).
10.
Fit the roller chain (N).
L = Hex Bolt M8 X 20 (01 pc)
L
= Flat washer Ø43 mm x Ø12 mm x 6.35
mm (01 pc)
The 3 sprockets must work perfectly
aligned, otherwise the roller chain
will be damaged.
IMPORTANT!
The bolts, nuts, washers and shims are
in the kit supplied with the head.
11.
Adjust the chain using the tensioner (B).
Loosen bolt (R) and push the tensioner
(B) against the chain, eliminating slack.
Retighten bolt (R).
4. Preparation
NOTE!