Nivus OCM F, Instruction Manual

Page: 62 / 110

Instruction Manual
OCM F
page 62 OCM F - rev. 05 / 06.04.2018
>Name< The relay output name may consist of four
characters max. which will be indicated in
main menu and in overview menu. Set the
name as described in chapter “23.1 Parame-
ter Menu “Measurement Place””.
Fig. 23-29 Limits submenu
>Level limit
relay< Relay will energise if a level limit value (to be set) has been exceeded
and will de-energise if flow falls below a second limit value (to be set).
>Relay mode<,
>ON point<,
>OFF point<,
>ON delay<,
>OFF delay<,
>Name<
See >Flow limit relay<
>Vel. limit
relay< Relay will energise if a velocity limit value (to be set) has been ex-
ceeded and will de-energise if flow falls below a second limit value (to
be set).
>Relay mode<,
>ON point<,
>OFF point<,
>ON delay<,
>OFF delay<,
>Name<
See >Flow limit relay<
>Temp. limit
relay< Relay will energise if a temperature limit value (to be set) has been
exceeded and will de-energise if flow falls below a second limit value
(to be set).
>Relay mode<,
>ON point<,
>OFF point<,
>ON delay<,
>OFF delay<,
>Name<
See >Flow limit relay<
Fig. 23-30 Submenu impulse