Parameter Setting
OCM F - rev. 05 / 06.04.2018
page 73
24.5 I/O submenu “Measure Data”
This menu can be used to view the currently measured and calculated measurement data at
one sight.
H
= Measured level
V
= Measured flow velocity
A
= Calculated area
Q = Calculated flow rate
t
= Measured temperature
q
= Quality of velocity measurement (damped)
Fig. 24-6
Screen measure data
24.6 I/O submenu “v-Sensor Info”
This menu is to indicate various information regarding the sensor and is mainly for service
purposes.
1
Creation date of sensor firmware
2
Calculated average flow velocity
3
Height measured by pressure sensor
4
Velocity of sound resulting from medium temperature
5
Amplification value of sensor
6
Amplification mode of sensor
7
Measured medium temperature
8
Quality of velocity measurement
9
Firmware version of sensor
Fig. 24-7
Status of sensors and velocity evaluation
Summary of Contents for OCM F
