Nivus OCM F, Instruction Manual

Page: 39 / 110

Initial start-up
OCM F - rev. 05 / 06.04.2018 page 39
EXTRA
Basic system and display settings:
-
Display
-
Contrast
-
Language
-
Units
-
Decimal digits
-
System times
-
Totalizer presets
Table 4 Functions of the basic menus
19 Operation Basics
The entire operation is menu driven. To navigate within the menu structure use the four con-
trol keys (see chapter “17 Operator Panel”).
>up<
-
Navigates upward in the respective submenu (e. g. PAR/measurement
place/name)
-
Select preset values e. g. units (m, cm, l/s, m³/s etc.)
-
Increase values
>down<
-
Navigates downward in the respective submenu (e. g. PAR/measurement
place/name)
-
Select preset values e. g. units (m, cm, l/s, m³/s etc.)
-
Decrease values
-
Set decimal point
>left<
-
Press once to toggle between indication mode and overview menu (main
menu)
-
Jump across in main or submenu
-
Jump across between identical measurement values (e. g. span of analog
outputs 1…3)
>right<
-
Press once to toggle between indication mode and overview menu (main
menu)
-
Jump across in main or submenu
-
Jump across between identical measurement values (e. g. span of analog
outputs 1…3)
>ESC<
-
Delete values
-
Each key action in menu → jumps
back one level until RUN menu
>ENTER<
-
Press once to toggle from RUN menu to overview menu (main menu)
-
Activate a submenu
-
Accept and store values, units and so on
Table 5 Functions of the control keys