Instruction Manual
OCM F
page 50
OCM F - rev. 05 / 06.04.2018
Fig. 23-5
Channel shape selection
Select channel shape with >Up< and >Down< keys.
Confirm selection with >Enter<.
The selected profile will be indicated in the bottom line of the display.
Fig. 23-6
Selected profile screen
Use >Custom shape< in this case the existing profile does not comply with the options to se-
lect from.
Confirm with >Enter<.
>Custom shape<
After having >Custom shape< selected, first choose >Channel dimen-
sions<.
>Channel
dimensions<
Type in the respective channel dimensions depending on the profile
chosen before.
Units
Please observe indicated units.
Choosing >Custom shape< will indicate a table of 32 possible breakpoints on the display.
As described above, enter the relations between height-width or height-area and enter the
according value pairs.
Fig. 23-7
List of breakpoints for >Custom shape<
In order to define the zero point of the channel start by entering 0 – 0 in breakpoint 1. All fur-
ther breakpoints can be set freely regarding height as well as width/area.
There may be different distances between individual level points. Furthermore it is not re-
quired to use all of the 32 breakpoints possible. The OCM F however is going to use a linear-
ization function between the breakpoints. Decrease the distance between breakpoints in case
of heavy and irregular fluctuation within the area.
Summary of Contents for OCM F
