Nivus OCM F, Instruction Manual

Page: 48 / 110

Instruction Manual
OCM F
page 48 OCM F - rev. 05 / 06.04.2018
23 Parameter Menu (PAR)
This menu is used to set all relevant parameters required to ensure reliable device function.
Choose from the following parameters:
•
Name of measurement place
•
Channel shape
•
Channel dimensions
•
Measurement place application (mode and medium)
•
Sensor types
•
Analog output (function, measurement range and measurement span)
•
Relay output (function and values)
All other functions are additions which are required in special cases only (controller mode or
for special hydraulic applications). These settings are normally made with the help of our
service personnel or by an authorised expert company.
The parameter menu >PAR< includes eight partially very extensive submenus which are
described individually on the following pages.
Fig. 23-1 Parameter menu
Scroll through the menu using the >up< and >down< keys.
23.1 Parameter Menu “Measurement Place”
This menu is one of the most important basic menus for parameter setting as the measure-
ment place is going to be defined here.
Fig. 23-2 Submenu measurement place
>Name< NIVUS recommends to coordinate and to define names according to
names stated in the respective documents. Names may contain up to
20 letters. The display, however, does not necessarily indicate the
complete name; what is decisive is the available space on each indi-
vidual page.
After the submenu >Name< has been selected the basic setting
“NIVUS” will come up. There is a cursor blinking below the first digit
which can be modified.
Underneath the measurement place name you can find a table with
20 lines containing all uppercase and lowercase letters as well as a
large number of special characters (see Fig. 23-3). Use the keys >up<