4 - FORM NO. 56043042 / Whirlamatic
™
2700 / BHS 7014
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
MAINTENANCE SCHEDULE
MAINTENANCE ITEM
Daily
Weekly
Monthly
Yearly
Charge Batteries
X
Check/Clean/Replace Burnishing Pad
X
Check/Replace Dust Collection Bag
X
Check Battery Water Level(s)
X
Check/Replace Pad Shroud Skirt
X
Check Foot/ Parking Brake for Wear & Adjustment
X
Check Tire Pressure (50 PSI)
X
Chain Tension - Steering and Drive
X
Lubrication - Grease Fittings
X
Check Pad Motor Belt Wear & Tension
X
Check Carbon Brush Wear On Pad/Drive/ Actuator Motors
X
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
LUBRICATING THE MACHINE
Once a month pump grease into each grease fitting (zert) on the machine (total of 10) until grease seeps out around the bearings.
Grease fitting locations are:
Qty 1 - Steering Wheel Shaft Universal Joint
Qty 3 - Drive Wheel Differential Bearings
Qty 1 - Rear Steering Spindle Bearing
Qty 3 - Rear Steering Chain Sprocket Bearings
Qty 2 - Rear Wheel Hub Bearings
MAINTENANCE
revised 8/00
