FORM NO. 56043042 / Whirlamatic
™
2700 / BHS 7014 - 13
BURNISHING SYSTEM
E
B
A
D
C
FRONT
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
PAD DRIVE BELT REPLACEMENT
1
See Figure 8. Remove the Cover (A).
2
Release tension on the Idler Pulley (B) by loosening Inner Bolt (C) while holding outer nut.
3
Remove the Idler Pulley (B) from the pad drive deck.
4
Remove the lower belt from the Motor Pulley (D).
5
Remove the upper belt from the Motor Pulley (D).
6
Remove both belts from the Pad Drive Pulley (E).
7
To reinstall the belts reverse steps 4-6.
8
Mount the Idler Pulley (B) on deck.
9
Adjust belt tension, see
Pad Drive Belt Tension Adjustment
section.
10
Reinstall Cover (A).
FIGURE 8
revised 2/02
