SERVICE MANUAL
OTHER SYSTEMS
GB
112
S30N1100(1)2002-01
ADVANCE BUMPER INSTALLATION (OPTIONAL)
1.
Drive the machine on a level ground.
2.
Turn the ignition key (10) to OFF position and activate the parking brake (17).
3.
Remove the screws (A) and recover the flare washers (B) then remove the “Pulimat model” (C) or “Nilfisk
model” (D) bumper.
4.
Unscrew the eyebolt (E) and the screw (F) and remove the wheel (G) and the spacer on machine both side;
reassemble the spacer (but not the wheel), with the screw and the eyebolt.
5.
If necessary, install the bumper roller (I) on the “Advance model” bumper frame (L).
6.
Install the bumper (L) on the machine, with the screws (M) and the flare washers (N) (reuse the screws (A)
and the flare washers (B)).
7.
Carry out step 1. and 2. in the reverse order.
Figure 2
S300141
Figure 3
S300142
I
I
M N
L
N
M
Summary of Contents for SR 1100 P/B
