Nilfisk-Advance SR 1100 P/B, Service Manual

Page: 115 / 120

49
TSB IT 2000-012
2- CONNECTING/INSERTING WIRES OF ELECTRIC ACTUATOR
ORDERING CODE 145 5573 000
The actuator corresponding to ordering code 145 5573 000 is used for
the following applications:
1 1
1 1- mainbrush up/down control on model SR 1100 – SR 5110: in this case
the connections has to be done according to Fig. 12- 01
2 2
2 2- mainbrush up/down control on model SR 1200 – SR 5120: in this case
the connections has to be done according to Fig. 12- 01
3 3 3 3- mainbrush up/down control on model SR 1300: in this case
- for machines until serial number 94504713 the connections must be
done according to Fig. 12- 02
- for machines starting from serial number 94504714 the connections
must be done according to Fig. 12- 01
4 4 4 4- control (open/close) of the hopper door on model SR 1300: in this case
the connections must be done according to Tab. 12- 01
Fig. 12 – 01: Jack motor (actuator) 145 5573 000: view from the pin
insertion side - connector pin function applicable for main brush up/down
control of:
- SR 1100 starting from ser. Number 91100581 (before, code 145 1778
000 was used, with external microswitches)
- SR 1200 starting from ser. Number 91200653 (before, code 145 1778
000 was used, with external microswitches)
- SR 1300 starting from ser. Number 94504714 (before, jack motor code
145 5573 000 was still used, BUT with different wire connections: see Fig.
12-02)
Drawing. 12 - 01