SERVICE MANUAL
FLAP
GB
94
S30N1100(1)2002-01
FRONT FLAP REPLACEMENT
1.
Drive the machine on a level ground.
2.
Turn the ignition key (10) to OFF position and activate the parking brake (17).
3.
Remove the left side brush (27), if present.
4.
Operating on the left front side of the front flap, disengage the spring (A) from the side (B).
5.
Disconnect the clip and detach the cable end (C) from the support (D).
6.
Remove the nut (E).
7.
Operating on the right front side of the front flap, remove the nut (F) and then remove the flap from its support
(G).
8.
At the cabinet bench, remove the screws (H), the strap (I) and the front flap (L). Install the new front flap (L)
with the strap (I) and the nuts (H).
9.
Carry out steps from 4. to 7. in the reverse order.
10. Adjust the height and check the operation of the front flap, as described on the previous pages.
11. Carry out steps from 1. to 3. in the reverse order.
Figure 10
S300110
Figure 9
S300109
Figure 11
S300111
H
I
L
Summary of Contents for SR 1100 P/B
