NF ZA57630, Instruction Manual

Page: 68 / 246

3.4 Operation Tree
3
-
32
ZA 57630
3.4 Operation Tree
The following shows the operation tree for operating this instrument from the panel. For
the descriptions of keys and screens, refer to
“3.1 Functions and Operations of Panel Parts”
.
Front Panel
MENU key
: Displays/hides the menu.
SETUP key
: Open a list of frequently set parameters.
[DISPLAY MODE Y]
: Set the measurement item.
[SWEEP ITEM]
: Set the sweep item.
[SWEEP UPPER]
: Set the sweep upper limit.
[SWEEP LOWER]
: Set the sweep lower limit.
[SETTING VIEW]
: Display a list of setting items.
CANCEL /ESC
: Discard the settings.
ENTER key
: Confirm the settings.
Up/down/left/right keys
: Move the cursor and change numerical values.
Modify knob
: Select menus, change parameters, move markers, etc.
SCREEN COPY key
: Execute an LCD screen copy.
(Marker operation keys)
TRACE key
: Switch the marker target data.
ACTIVE key
: Switch the active marker.
(Measurement control keys)
STOP key
: Stop measurement.
DOWN key
: Start down-sweep measurement.
SPOT key
: Start spot measurement.
UP key
: Start up-sweep measurement.
REPEAT key
: Switch between single measurement and repeat measurement.
REPEAT lamp
: Lit during repeat measurement.
(Measurement signal control keys)
AC/DC OFF key
: Turn off both AC and DC.
AC OFF key
: Turn off only AC.
AC/DC ON key
: Turn on both AC and DC.
AC lamp
: Lit when AC output.
DC lamp
: Lit when DC output.