NF ZA57630, Instruction Manual

Page: 125 / 246

3.5 Setting Screen Reference
3
-
89
ZA 57630
■ [HANDLER]
: Set the handler interface.
■ [HANDLER]
－
[TRIGGER POLARITY]
: Select the trigger polarity.
Set the trigger polarity (rising or falling).
○ Setting procedure
<List operations (immediate settings)>
・
POSITIVE
: Trigger on the rising edge.
・
NEGATIVE
: Trigger on the falling edge.
■ [HANDLER]
－
[SWEEP DIRECTION]
：
Set the direction for a sweep using a handler trigger.
This sets the direction for sweep measurement using a handler trigger.
○ Setting procedure
<List operations (immediate settings)>
・
UP
: Start up-sweep measurement with a trigger.
・
DOWN
: Start down-sweep measurement with a trigger.
・
SPOT
: Start spot measurement with a trigger.
■ [HANDLER]
－
[TEST SCREEN]
: Display the handler test screen.
This displays a screen to check the connection state of the handler interface and perform
simulation output of comparison results. For the operating procedures, refer to
“1.16.3 Handler Interface Test Screen”
in
Instruction Manual (Advanced)
.
○ Setting procedure
<Execution operations (immediate execution)>
○ Functions of function keys
・
[TEST]
: Display the handler interface test screen.