NF ZA57630, Instruction Manual

Page: 146 / 246

3.5 Setting Screen Reference
3
-
110
ZA 57630
3.5.15 Setup Menu
This menu is displayed by pressing the
SETUP
key on the front panel or tapping the
[SETUP] button on the screen.
This shortcut menu allows you to easily set the items for which settings are frequently
changed on this instrument.
■ [DISPLAY MODE Y]:
Set the Y-axis formats.
This sets the format (type) of the Y1-axis and Y2-axis of graphs. The setting is the same as
“■ DISPLAY MODE Y”
in
“3.5.5 Graph Menu”.
■ [SWEEP ITEM]:
Set the sweep parameter.
This selects the parameter to sweep. The parameter set here becomes the X-axis of the graph.
The setting is the same as
“■ SWEEP ITEM”
in
“3.5.4 Sweep Menu”.
■ [SWEEP UPPER]:
Set the sweep upper limit.
The setting is the same as
[SWEEP UPPER]
in
“3.5.4 Sweep Menu”.
■
[SWEEP LOWER]:
Set the sweep lower limit.
The setting is the same as
[SWEEP LOWER]
in
“3.5.4 Sweep Menu”.
■
[SETTING VIEW]:
Display a list of the major current settings of this instrument.
○ Setting procedure
<Execution operations (immediate execution)>
[Trace]
–
[CONDITION VIEW]
displays a list of the settings used when the data trace
indicated by the active marker was measured, whereas
[SETTING VIEW]
displays a list of the
current measurement conditions of this instrument. Please be careful because they may both
differ.