NF ZA57630, Instruction Manual

Page: 162 / 246

4.1 Display and Operation when Power Is Turned On
4
-
4
ZA57630
4.1.4 Startup Screen and Operation on Startup
When the power switch is turned on, the startup screen appears. Furthermore, all lamps are
lit for the first several seconds while an operation check is performed.
During this period, the internal initial settings are configured and self-diagnosis is
performed. If an error is detected, an error message is displayed. If that happens, turn off the
power switch on the rear panel, wait at least five seconds, and then turn the power switch
back on. If the error occurs again, this instrument may be malfunctioning, so please contact
NF Corporation or its authorized agent.
Startup Screen
When this instrument starts up normally, the initial screen appears.
Initial Screen
From this point, operations such as setting and measurement are possible.