NF ZA57630, Instruction Manual

Page: 132 / 246

3.5 Setting Screen Reference
3
-
96
ZA 57630
■ [PORT EXT]
－
[LOAD_PEXT CORR]
－
[LOAD STD VALUE]
－
[[PORT EXTENTION LOAD STANDARD VALUE]]
: Set the load standard values at port
extension tip.
Set the frequency and load standard values at port extension tip. Up to 30 sets of load
standard values (30 frequencies) can be set.
When the parameter is selected and the knob is turned clockwise, the setting item changes in
the order of No. 1 Frequency → No. 1 Standard Value (Y1) → No. 1 Standard Value (Y2) →
No. 2 Frequency → No. 2 Standard Value (Y1) → No. 2 Standard Value (Y2) → ...
○ Setting procedure
<Numerical settings (requiring confirmation)>, <Numerical settings>
○ Functions of function keys
・
[DELETE LINE]
: Delete the line.
・
[SORT]
: Sort the displayed information in frequency ascending order.
・
[EDIT]
: Set the load standard values with the numerical input palette.
・
[MODIFY]
: Modify the load standard values with the knob or cursor keys.
The setting range is 10 µHz to 36 MHz and the setting resolution is 10 µHz for the frequency.
The setting range is –1.0 T to +1.0 T and the setting resolution is 6 digits or 1 a (10
–18
),
whichever is larger, for the port extended end load standard values.
■ [SLOPE COMP]
: Set the slope compensation function.
This function is used when performing such as electrochemical impedance measurement. It
can be set when the measurement mode is IMPD−EXT, IMPD−3T and IMPD−2T. Usually,
this function should be turned off when using this instrument. For details, refer to
“1.8.7
Slope Compensation Function”
in
Instruction Manual (Advanced)
.
○ Setting procedure
<List operations (immediate settings)>
・
OFF
: Turn the slope compensation function off.
・
ON
: Turn the slope compensation function on.
■ [EQUALIZING] ：
Set equalizing.
This sets the equalizing function to ON or OFF. It can be set when the measurement mode is
G−PH.
○ Setting procedure
<Numerical settings (requiring confirmation)>, <Numerical settings>
○ Functions of function keys
・
[ON/OFF]
: Enable or disable the equalizing function.
・
[COPY TO REF8]
: Copy the equalizing data to reference data 8 (REF8).
・
[EDIT]
: Set the equalizing data number with the numerical input palette.
・
[MODIFY]
: Modify the equalizing data number with the knob or cursor keys.