Install 2 x T-Nuts into the front channel and 2 x T-Nuts into the back channel of the Left Vertical Post.
Repeat for the Right Vertical Post.
Video Instruction: bit.ly/nlrbuild
14
15
PARTS:
• • Side Mount Brackets
• • 4 x M8 14mm Low Profile Bolts
• • 4 x M8 Nylon Washers
13d
PARTS:
• • NIL
13f
Loosen the Bolts securing the Side Mount Brackets to the Wheel Front Mount Plate. Adjust the Wheel
Base to the desired angle and tighten the Bolts to lock in place.
PARTS:
• • 4 x M8 25mm Low Profile Bolts
• • 4 x M8 Nylon Washers
• • 4 x M8 Flange Nuts
13e
Align the Wheel Base Assembly with the slots on the Mounting Arms. Bolt through and secure with
4 x M8 Low Profile Bolts, Nylon Washers and Flange Nuts.
A) Align the Side Mount Brackets holes with the threaded inserts on the Front Mount Brackets.
B) Bolt through and secure with 2 x M8 Low Profile Bolts and Nylon Washers. Repeat on other side.
PARTS:
• • 8 x M8 T-Nuts
13a
PARTS:
• • Mounting Arms
• • 8 x M8 16mm Bolts
• • 8 x M8 Washers
• • 4 x Sticky Felt Pads
(90mm x 10mm)
13b
A) Install Felt Pads to the Mounting Arms.
B) Align the holes on the Mounting Arms with the T-Nuts previously installed in STEP 13a. Bolt through and secure with 4 x M8
Bolts and Washers. Repeat on the other side.
Note:
Use level provided to ensure
the Wheel Assembly is kept flat during
installation to avoid skewing.
Felt Pads
PARTS:
• • Front Mount Bracket
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
13c
A) Align the slots on the Front Mount Bracket with the mounting holes on your Front Mount Wheel Base.
B) Bolt through and secure with 4 x M8 Bolts and Washers.
Repeat
on Other
Side
Repeat
on Other
Side
FRONT MOUNT ANGLE ADJUSTMENT
FRONT MOUNT ASSEMBLY
(SKIP TO STEP 14a FOR SIDE MOUNT ASSEMBLY)
A
)
B
)
A
)
B
)
A
)
B
)
Note:
Use level provided to ensure
the Wheel Assembly is kept flat during
installation to avoid skewing.
