Install 1 x T-Nut into the side channel of the Pedal Arm. Repeat on the other side.
Align the holes on the Upright Connection Plate with the T-Nut previously installed in STEP 16a. Bolt
through and secure with M8 Bolt and Washer. Repeat on the other side.
18
19
PARTS:
• • 2 x M8 16mm Bolts
• • 2 x M8 Washers
• • 1 x Small Pedal Plate
18
A) Align the Small Pedal Plate with the T-Nuts previously installed in STEP 15a.
B) Bolt through and secure using M8 Bolts and Washers.
PARTS:
• • 2 x T-Nuts
16a
PARTS:
• • 8 x M8 T-Nuts
15a
Install 3 x T-Nuts into the top channel and 1 x T-Nut into the side channel of the Left Pedal Arm. Repeat
the same steps for the Right Pedal Arm.
Note:
Use laser lines for
easy alignment.
Repeat
on Other
Side
PARTS:
• • 4 x M8 16mm Bolts
• • 4 x M8 Washers
• • 1 x Large Pedal Plate
17
A) Align the Large Pedal Plate with the T-Nuts previously installed in STEP 15a.
B) Bolt through and secure with M8 Bolts and Washers.
PARTS:
• • 2 x M8 60mm Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
• • 2 x Square Washers
15b
Align the through hole on the Pedal Arm with the hole on the Upright Connection Plate. Bolt through
and secure with M8 Bolt, Washer, Square Washer and Flange Nut. Repeat on the other side.
Note:
Do not tighten the
Pedal Plate until the desired
position has been achieved.
Note:
For Shorter Users Please Skip
to STEP 16a & 16b.
Repeat
on Other
Side
PARTS:
• • 2 x M8 20mm Bolts
• • 2 x M8 Washers
16b
Repeat
on Other
Side
Video Instruction: bit.ly/nlrbuild
A
)
B
)
(
LEFT
)
(
RIGHT
)
TOP VIEW
SIDE VIEW
A
)
B
)
ALTERNATE PEDAL INSTALLATION
(
FOR SHORTER USERS
)
(
PRE-DRILLED HOLE
)
(
PRE-DRILLED HOLE
)
(
LEFT
)
(
RIGHT
)
(
PRE-DRILLED HOLE
)
(
PRE-DRILLED HOLE
)
ALTERNATE PEDAL INSTALLATION
(
FOR SHORTER USERS
)
