NexSens Technology X2-CB, User Manual

Page: 90 / 115

7. Remove the spent bag of desiccant and place a fresh bag in its place.
8. Carefully set the enclosure base back on to the logger plate, aligning the threaded inserts of the plate with
the screw holes in the base.
a. Ensure the large exterior O-ring is secure in the grooves of the base and is making proper contact with
the bottom of the logger plate.
b. Verify that when closed the power cable feeding up through the enclsoure base lies flat and is not
pinched when closed.
Replace desiccant bag.
Ensure the power cable will not
be pinched and that the O-ring
is seated properly.
90