NexSens Technology X2-CB, User Manual

Page: 28 / 115

b. Reconnect the 6-pin plug on the bottom cable of the X2 logger to the battery harness cable.
15. Align the plate and re-install the (8) bolts with lock washers, tightening them in a cross-pattern using a 9/16″
socket wrench.
a. Orient the SOLAR/COM port towards one of the deployment tubes for easier access when the solar
tower is installed.
b. Ensure there are no substantial gaps between the data logger plate and the metal frame of the buoy
data well.
16. Re-install the solar tower and move the buoy outside. Power on the logger using the solar tower plug and
gather multiple hours of readings to ensure the primary power is increasing while the buoy is in direct
sunlight.
Re-connect the data well 6-pin cable connection.
Bolt down the X2-CB/X2-CBMC. Bolt down the logger in a crisscross pattern.
28