NexSens Technology X2-CB, User Manual

Page: 55 / 115

4. Complete this process for all of the field radio nodes.
Detect Field Radios
1. Power down the entire network, including the base station.
2. On WQData LIVE, Access the Advanced Device Remote Configuration Tool.
3. Scroll to Radio Settings at the bottom of the interface and choose Yes for the New Value.
a. A detect radios command has been sent to the command queue. Once the base station is powered on,
it will pull that command and begin to detect the field nodes.
4. Power on all of the field nodes first, and then power on the base station.
a. This provides adequate time for the field radio nodes to start transmitting their signal to the base
station.
b. Once all of the field nodes have been found, they will display in underneath the Radio Settings.
5. All nodes within the radio network should contact and push data based on their internal log and transmit
intervals.
Send the detect radios command.
Successful radio detection of node 01326.
55