NexSens Technology X2-CB, User Manual

Page: 113 / 115

18. Place the re-assembled X2-CB back on top of the data well.
a. Make sure the primary data well O-ring is clear of debris and centered in the groove.
b. Reconnect the 6-pin plug on the bottom cable of the X2 logger to the battery harness cable in the datawell.
c. Align the plate and re-install the (8) 3/8-16×3/4 bolts and 3/8 lock washers, tightening them in a cross-
pattern using a 9/16 socket wrench.
Evenly tighten the enclosure back to the CB-plate.
Verify the data well O-ring is present and clear of debris.
113