NexSens Technology X2-CB, User Manual

Page: 69 / 115

Changing Sensor Logging Intervals
Independent Log Intervals can be configured for each sensor connected to an X2 or G2-Series data logger
through the Device Remote Device Configuration tool.
To update sensor log intervals in WQData LIVE:
1. Navigate to the Device Remote Configuration tool within the administrator settings.
a. Select the site and desired data logger to make adjustments.
2. Locate the Log Interval section of the configuration menu and enter the desired data collection interval for
each sensor into the New Value fields.
a. Intervals of 5 minutes to 1440 minutes (1 day) are accepted.
b. Note: Increasing the logging frequencies of sensors will increase power demand for the system. Verify
the adjustment is sustainable if the system relies on solar-charged battery power for operation.
c. Note: Certain sensors take multiple minutes to record and process a reading. Contact NexSens to
verify the maximum recommended sampling frequency of a device before increasing its frequency.
3. Scroll to the bottom of the menu and click SAVE.
a. A successful prompt should appear.
4. Following the data logger’s next transmission to WQData LIVE, the log interval change(s) will be applied
and the Current Value fields will reflect the new log intervals.
Enter desired log interval changes into the New Value field for each sensor.
Log interval update successfully applied.
69