© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
214
SLIDEOUTS
There is no set schedule for cleaning the slideout rollers.
It will vary based on the cleanliness of the coach, and
other factors such as dust, dirt, sand storms, as well as the
type and condition of the roads traveled.
The following list provides examples of when the rollers
should be cleaned:
•
Liquid spills on the roller, floor, or under the slideout
•
Fragments from broken glass, pottery, or other sharp
objects on the roller, floor, or under the slideout
•
Sand or other abrasive materials on the roller, floor, or
under the slideout
•
Hair wrapped around the roller or shaft
•
The roller begins sliding on the floor instead of rolling
smoothly
Slideout rollers may leave indentations in the flooring.
This condition is normal and does NOT warrant
flooring replacement.
IMPORTANT
!
Slideout rollers may leave indentations in the flooring.
This condition is normal and does NOT warrant
flooring replacement.
IMPORTANT
!
It is important to clean the slideout rollers under the
floor regularly. Dirt and other debris may adhere to
the rubber coating on the rollers, which may lead to
a dull finish, scratching, scoring, or further damage
to the flooring. Such damage is NOT covered under
warranty.
IMPORTANT
!
It is important to clean the slideout rollers under the
floor regularly. Dirt and other debris may adhere to
the rubber coating on the rollers, which may lead to
a dull finish, scratching, scoring, or further damage
to the flooring. Such damage is NOT covered under
warranty.
IMPORTANT
!
Cleaning The Slideout Rollers
Removable Electric Full Wall Slideout Roller Transport
Pads
This article provides information about when and how to clean the rollers on an electric slideout.
When To Clean The Rollers
How To Clean The Rollers
1. The slideout rollers can usually be accessed by
extending the slideout half way.
2. Blow any remaining debris from under the slideout.
3. If possible, clean the ramps for the electric flat floor
slideouts.
4. If more room is necessary to clean the ramp and
rollers, push out on the top of the room and slide a
wooden wedge between the floor and the bottom of
the slideout in a few di
ff
erent places to create more
clearance.
5. Clean the rollers one at a time with a soft cloth and
a mild cleaner. A wet Swi
ff
er cloth can also be used.
Do not use harsh cleaners or solvents that may soften
plastics.
6. Another alternative is to clean a portion of each of
the rollers, then move the room slightly to clean the
next portion. Repeat this process until all of the rollers
have been cleaned all the way around.
Manually Retracting an R3 or O1 Series Electric
Bedroom Slideout with a Square Shaft
This article provides instructions for manually retracting a bedroom slideout with a square shaft if it will not retract on its own.
This article provides basic information about removable
electric full wall slideout roller transport pads. If your
coach is equipped with tile protectors, place them over
the tile at each slideout roller before retracting your
slideout prior to travel. Earlier versions of floor protectors
have a lip that fits at the edge of the tile facing down.
Later versions do not have a lip, as they are tapered on
one end with a rubberized back.
Place the tapered edge toward the roller with the rubber
back against the tile. Make sure both the floor and the
rubberized backer are clean. The roller should move up
the tapered edge onto the tile protector.
Summary of Contents for VENTANA 2022
Page 1: ...SM 2022...