© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
212
SLIDEOUTS
Electric Slideout Operation
This article provides basic operation instructions for an electric slideout.
Electric Slideouts
Electric Slideout Switches
Electric Slideout Operation
In order to operate a slideout with the required voltage
levels, batteries should be fully charged, the generator
should be powered on, or the coach should be connected
to shore power. This maintains the voltage levels required
to operate the slideouts.
ELECTRIC BEDROOM SLIDEOUTS
The operating switch for the bedroom slideout is usually
located on the bedroom wall. If there is a full wall slideout
on the driver side of the coach, the switch may be located
on the wall that separates the bedroom from the living
room.
ELECTRIC FLAT FLOOR SLIDEOUTS
Newmar pushed the RV industry forward by introducing
the first flat floor slideouts. We continue to lead today
with our patented flat floor slideout designs. The same
insight and experience that helped us improve slideout
functionality has also helped us improve slideout quality.
The operating switch for the flat floor slideout is usually
located in the overhead cabinet above the driver or
passenger chair or the overhead cabinet above the
entrance door.
ELECTRIC FULL WALL SLIDEOUTS
Most electric full wall slideouts extend from the living area
to the master bathroom in a Newmar coach.
ELECTRIC KITCHEN SLIDEOUTS
The operating switch for the kitchen slideout is usually
located in the overhead cabinet above the driver or
passenger chair or the overhead cabinet above the
entrance door.
ELECTRIC WARDROBE SLIDEOUTS
The operating switch for the wardrobe slideout is
usually located in the bedroom, on the wall beside the
corresponding slideout.
RETRACTING THE SLIDEOUT ROOM
1. Slideout end windows must be shut before moving
room.
2. Look for and remove any obstructions before moving
room.
3. Caution on motorhomes: Move driver seat forward
before moving room.
4. Press and hold the appropriate slideout switch until
the slideout room is fully retracted and stops moving.
5. Release the switch. Note: The slideout room
movement can be stopped at any time by releasing
the switch.
6. If rooms are equipped with Manual Lock Arms, be
sure to engage lock arm when rooms are in and
before moving coach.
EXTENDING THE SLIDEOUT ROOM
1. Slideout end windows must be shut before moving
room.
2. Look for and remove any obstructions before moving
room.
3. Caution on motorhomes: Move driver seat forward
before moving room.
4. If rooms are equipped with Manual Lock-Arms, be
sure to release arms before running room out.
5. Press and hold the appropriate slideout switch until
the slideout is fully extended and stops moving.
6. Release the switch. Note: The slideout room
movement can be stopped at any time by releasing
the switch.
•
On diesel coach slideouts: Park brake must be
engaged before operation the slideout rooms. The
slideout room will not operate when Park Brake is
released.
•
On gas coach slideouts: Ignition key must be turned
o
ff
or in accessories position before operating the
slideouts. The slideout rooms will not operate when
the ignition key is in the ignition ON position.
Read entire slideout room instructions posted in your
coach before extending or retracting the slideout.
IMPORTANT
!
Summary of Contents for VENTANA 2022
Page 1: ...SM 2022...
