© 2021 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
131
ENTERTAINMENT SYSTEMS
Resetting The Unit
Before operating the unit for the first time, after replacing
coach batteries, if the coach batteries were depleted,
or changing if the connections, you must reset the unit.
Press DSPL and CALL simultaneously for more than 2
seconds.
Note: Resetting the unit will erase the clock setting and
some stored contents.
Setting The Clock
1. Press MENU, rotate the control dial to select
[GENERAL], then press it.
2. Rotate the control dial to select [CLOCK ADJ], then
press it. The hour indication flashes.
3. Rotate the control dial to set the hour and minute. To
move the digital indication, press
|
⊳⊳
/
⊲⊲
|
(SEEK –/+).
4. After setting the minute, press MENU. The setup is
complete and the clock starts. To display the clock
Press DSPL.
CAUTION
!
iPhone ONLY: When you connect an iPhone via USB,
phone call volume is controlled by the iPhone, not the
unit. Do not inadvertently increase the volume on the
unit during a call, as a sudden loud sound may result
when the call ends.
Source(s): Sony Bluetooth Audio System WX-920BT Operating
Instructions
Product(s): Sony Compact Disc Receiver w/Bluetooth (Model: WX-920BT,
Newmar Part Number: 147972)
Preparing A Bluetooth Device
You can enjoy music, or perform hands-free calling
depending on the BLUETOOTH compatible device such as
a smartphone, cellular phone and audio device (hereafter
“BLUETOOTH device” if not otherwise specified). For
details on connecting, refer to the Sony Bluetooth Audio
System WX-920BT Operating Instructions.
Listening To The Radio
To listen to the radio, press SRC to select [TUNER].
TUNING
1.
Press MODE to change the band (FM1, FM2, FM3, AM1
or AM2).
2.
Perform tuning.
•
To tune manually, press and hold
|
⊳⊳
/
⊲⊲
|
(SEEK
–/+) to locate the approximate frequency, then
press
|
⊳⊳
/
⊲⊲
|
(SEEK –/+) repeatedly to fine adjust
to the desired frequency.
•
To tune automatically, press
|
⊳⊳
/
⊲⊲
|
(SEEK –/+).
Scanning stops when the unit receives a station.
STORING MANUALLY
While receiving the station that you want to store,
press and hold a number button (1 to 6) until [MEMORY]
appears.
RECEIVING THE STORED STATIONS
Select the band, then press a number button (1 to 6).
Playing A USB Device
1. Connect a USB device to the USB port. Playback
starts. If a device is already connected, to start
playback, press SRC to select [USB] ([the source]
appears in the display when the it is recognized).
2. Adjust the volume on this unit. To stop playback,
press and hold OFF for 1 second. To remove the
device, stop playback, then remove the device.
Playing A Disc
1. Insert the disc (label side up). Playback starts
automatically.
Playing A Bluetooth Device
You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile).
1. Make BLUETOOTH connection with the audio device.
To select the audio device, press MENU, then select
[BLUETOOTH]
→
[AUDIO DEV].
2. Press SRC to select [BT AUDIO].
3. Operate the audio device to start playback.
4. Adjust the volume on this unit.
Summary of Contents for VENTANA 2022
Page 1: ...SM 2022...