NewMar London Aire 2021, Owner'S Manual

Page: 41 / 204

© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
36
APPLIANCES
Internal Control Panel
External Control Panel
TEMPERATURE CONTROL
For your convenience, the temperature control is preset
at the factory. When you first install your refrigerator, make
sure the control is still set to the recommended setting (3
Snowflakes).
ADJUSTING THE CONTROLS
If you need to adjust the temperature in either the
refrigerator or freezer compartment, use the settings listed
in the following chart as a guide.
•
Press the Temp button to display the desired number
of snowflakes from 1 snowflake (least cold) to all 5
snowflakes (coldest).
NOTE: Except when starting the refrigerator, do not adjust
the control more than one setting at a time. Wait 24 hours
between adjustments for the temperature to stabilize.
Condition/Reason Adjustment
Refrigerator too warm Fridge Temp: One more snowflake
Freezer too warm or too little ice Freezer Temp: One more snowflake
Refrigerator too cold Fridge Temp: One less snowflake
Freezer too cold Freezer Temp: One less snowflake
COOLING ON/OFF
INTERNAL CONTROL PANEL
•
To turn cooling o ff , press and hold both the Fast Cool
and Moisture Control buttons at the same time for
3 seconds. When cooling is OFF, “Cooling O ff ” will
appear on the display screen.
• To turn cooling back on, press and hold both the Fast
Cool and Moisture Control buttons at the same time
for 3 seconds. When cooling is ON, “Cooling O ff ” will
disappear and the previously selected settings will
appear on the display screen.
The display screen on the dispenser control panel will
turn o ff automatically and enter “sleep” mode when the
control buttons and dispenser paddles have not been
used for 2 minutes or more. While in “sleep” mode, the
first press of a control button will only reactivate the
display screen, without changing any settings. After
reactivation, changes to any settings can then be made.
If no changes are made within 2 minutes, the display will
re-enter “sleep” mode. Touch any control button on the
dispenser panel to activate the display screen.
EXTERNAL CONTROL PANEL
•
To turn cooling o ff , press and hold both the Freezer
Temp and Fridge Temp buttons at the same time for 3
seconds. When cooling is o ff , “Cooling O ff ” will appear
on the display screen.
•
To turn cooling back on. Press and hold both the
Freezer Temp and Fridge Temp buttons at the same
time for 3 seconds. When cooling is on, “Cooling O ff ”
will disappear and the previously selected settings will
appear on the display screen.
Additional Features
DOOR OPEN ALARM
•
The Door Open icon lights up whenever either door is
opened.
•
When either door is open for 5 minutes and cooling
is on, an alert tone will sound three times, and the
Door Open icon will flash seven times. This pattern will
repeat every 2 minutes until all the doors are closed
properly. The feature then resets and will reactivate
when either door is left open again for 5 minutes.
NOTES:
•
To mute the audible alarm while keeping the doors
open, such as while cleaning the inside of the
refrigerator, press any button on the control panel.
The alarm sound will be temporarily turned o ff , but the
Door Open icon will still be displayed on the dispenser
control panel.
•
Both doors must be fully closed to turn o ff the Door
Open icon.
FAST COOL
The Fast Cool feature assists during times of high
refrigerator use, full grocery loads or temporarily warm
room temperatures.
•
Press FAST COOL to set the freezer and refrigerator
to the coldest temperature settings. Press FAST COOL
again to return to the selected temperature set point.
NOTES:
•
The Fast Cool icon will be illuminated while the
refrigerator is in Fast Cool mode.
• The Fast Cool feature will turn o ff automatically after 24
hours.