© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
129
EXTERIOR
This article provides basic operation instructions for an Algoma Net Hammock (Model: 4901HPSP).
The Patio Hammock o
ff
ers a great place to relax and enjoy the sun or shade, your favorite show on the exterior
television, or a good book.
Algoma Net Hammock Operation (Model: 4901HPSP)
How To Set Up The Hammock
1. Start with inserting the pin assembly into the
sidewall receptacle or the tree mounted strap
assembly, then pull the locking pin out and slide the
frame apart until you see the first hole and replace
the locking pin.
•
(This will be the initial mounting position for your
hammock until it stretches from use. If you see the
stop sticker you have gone too far, compress till
you see the next hole and pin.)
2. Next unfold the legs in the downward position and
spread till they are fully extended.
Source(s): Hammock User Guide
Product(s): Algoma Net Hammock w/Pad, Pillow, and Chain (Model:
4901HPSP, Newmar Part Number: 131134)
3. Now attach one end of hammock mounting chain in
one end and unroll web to expose the opposite end
and attach mounting chain.
4. Loose parts [may] include the optional tablet/phone
mount; slide into Aire Nest.
5. Sit on the edge of hammock first near center, then
swivel legs up into comfortable position.
Your motorhome is equipped with a hitch and tow plug, as it is designed for towing light loads. Your hitch
may provide you with the capability of towing your car or trailer while traveling. A wiring harness or pigtail
is needed to connect tail lights, brake lights, turn lights, etc. of the towed vehicle with that of the coach.
Some coach models feature rear docking lights to assist with tow vehicle hookup at night.
Hitches and Towing Components
Prior To Towing
Prior to towing, inspect all towing connections, including
the hitch mounting bolts for unusual wear or corrosion.
Check the mounting flanges for any deformation, as well
as the hitch welds for any cracks, signs of movement,
or fatigue in the hitch assembly. Safe and satisfactory
performance of the towing system depends on the type
of towing equipment connected to the hitch receiver. The
assembled length of the drawbar/towing system used
should be kept to a minimum. Do not exceed the rated
capacities of the hitch or the components used to attach
the towed vehicle or trailer.
Towing Capacity
The total weight of the motorhome and any vehicle
towed must not exceed the GCWR (Gross Combined
Weight Rating). When planning to tow, approaching
the GVWR (Gross Vehicle Weight Rating) may reduce
the motorhome’s towing capacity. When weighing the
motorhome, be sure to take passenger locations into
consideration. The towed vehicles must have adequate
active brakes. Contact your state Department of
Transportation or your local Newmar dealer for your state
requirements.
Newmar is not responsible for damage or failure of the hitch receiver caused by the use of excessively long
drawbars or other styles of drawbars that create leverage loads on the hitch receiver beyond its designed
capabilities.
IMPORTANT
!
Summary of Contents for London Aire 2021
Page 1: ...2021 sm...
