© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
33
APPLIANCES
Exterior Portable Freezers
Item
Description
Explanation
1
ON / OFF
Switches the cooler on or o
ff
when the button is
pressed for between one and two seconds.
2
POWER
Status Indication:
•
LED lights up green: Compressor is on
•
LED lights up orange: Compressor is o
ff
•
LED flashes orange: Display switched o
ff
automatically due to low battery voltage
3
ERROR
Status Indication:
•
LED flashes red: Device is switched on but
not ready for operation
4
SET
Selects the input mode:
•
Temperature setting (large/small
compartment)
•
Celsius or Fahrenheit display
•
Set battery monitor
•
Set brightness of display
•
Switch WiFi on or o
ff
5
Cooling Large
Status indication large compartment:
•
LED lights up blue: compartment is cooling
•
LED o
ff
: compartment is not cooling
6
Display Large
•
Shows information for large compartment
•
Shows “OFF” when the compartment is
switched o
ff
7
Display Small
•
Shows information for small compartment
•
Shows “OFF” when the compartment is
switched o
ff
8
Cooling Small
•
Status indication small compartment:
•
LED lights up blue: compartment is cooling
•
LED o
ff
: compartment is not cooling flashes
red: Device is switched on but not ready for
operation
9
DOWN -
Press once to decrease the value
10
UP +
Press once to increase the value
SELECTING THE TEMPERATURE UNITS
USING THE COOLER
Temperature display units can be switched between Celsius
and Fahrenheit as follows:
1.
Switch on the cooler.
2.
Press the SET button twice.
3.
Use the UP+ or DOWN- buttons to select Celsius or
Fahrenheit.
The selected temperature units then appear in the display
for a few seconds. The display flashes several times before
it returns to the current temperature.
1.
Place the cooler on a firm foundation. Make sure that
the ventilation slots are not covered and that the
heated air can dissipate.
2.
Connect the cooler.
3.
Press the “ON/OFF” button for between one and two
seconds.
4.
The LED “POWER” button lights up.
5.
The display switches on and shows the current
temperatures. Depending on the compartment set
temperatures, the cooler starts cooling either one or
both compartments.
6.
The LEDs light up when the respective compartment is
cooling.
Dometic Exterior Portable Freezer Operation
(Models: CFX75DZW, CFX95DZW)
This article provides basic operation instructions for a Dometic Exterior Portable Freezer (Models: CFX75DZW, CFX95DZW).
Operating and Display Elements
Operation
Before starting your new cooler for the first time, you
should clean it inside and outside with a damp cloth
for hygienic reasons.
NOTICE
!
Danger of Overheating! Ensure at all times that
there is su
ffi
cient ventilation so that the heat that
generated during operation can dissipate. Ensure
that the ventilation slots are not covered. Make sure
that the device is su
ffi
ciently far away from walls and
other objects so that the air can circulate.
DANGER
!
When operating with the battery, the display switches
o
ff
automatically if the battery voltage is low. The LED
“POWER” button flashes orange.
NOTICE
!
Summary of Contents for London Aire 2021
Page 1: ...2021 sm...
