© 2020 Copyright Newmar Corporation. All rights reserved. For the most up-to-date version of this content, and for more product-specific information, please refer to Newgle.
165
PLUMBING
Shower Dispenser Overview
This article provides basic operation instructions for a Shower Dispenser (Soap, Shampoo, Conditioner, Body Wash).
Filling Chambers and Priming
Pumps
1. Only after the silicone is fully cured can the mounting
bracket support the weight of the liquids. Fill the
chamber(s) with your choice of liquid(s).
2. Prime the pump(s).
a. Push button in.
b. While holding the pump button in, place your finger
over the spout of the pump to block the airflow up
into the pump. This creates a partial vacuum in the
pump chamber, when the button is released.
c. Keep your finger over the spout and release the
pump button.
d. Remove your finger from the spout and repeat
these steps until you have a continuous flow of
liquid. This may take several cycles, especially
when using very thick liquids.
Source(s): The Dispenser Soap and Shampoo Owner’s Manual
Product(s): This source is associated with more than one product. Refer
to Newgle for more information about the product(s) o
ff
ered for your
coach’s model year.
Maintenance
Bathroom cleaners can often contain aggressive
chemicals and abrasives, designed to clean ceramic and
porcelain surfaces. These cleaners are likely to damage,
deteriorate or discolor the dispenser.
Before using any cleaner, read the list of ingredients on
the label. The best method for cleaning the dispenser is
with a soft damp cloth.
To shower while dry camping, follow these steps:
1. Turn on the Aqua Miser light at the switch panel. The
light will turn blue inside the translucent mushroom
cover when the water temperature is cold.
2. Turn your shower faucet to the “hot” position.
3. Place the Aqua Miser lever in the “diverted” position
so that no water is coming out of the shower head.
This will divert the water back to the fresh tank
instead of wasting the water and filling the grey tank.
The blue LED light will turn o
ff
and the red LED will
turn on when the water gets hot. When this happens,
the system is ready for final shower temperature
adjustments to be made.
4. Turn the Aqua Miser lever back to the position to
allow water to flow freely from the shower head.
5. Adjust the water temperature to the desired setting.
If using the Aqua Miser while the coach is connected
to city water, water will be added to the fresh tank.
Adding water to the fresh tank in this manner
is unregulated and may cause the fresh tank to
overflow, giving the appearance that the auto fill
system is malfunctioning.
IMPORTANT
!
Aqua View (SinkMi$er, ShowerMi$er) Fresh Water
Reclamation System Overview
This article provides basic operation instructions for a Aqua View (SinkMi$er, ShowerMi$er) Fresh Water Reclamation
System. Some coaches may be equipped with an Aqua Miser Fresh Water Reclamation System, which is intended to
conserve water and grey tank capacity.
Coaches Equipped With
Translucent Mushroom With
LED Lights
Summary of Contents for London Aire 2021
Page 1: ...2021 sm...
