Enter Setup
** Exit Setup
26
Timeout between Decodes (Same Barcode) can avoid undesired rereading of same barcode in a given period of time. It is
programmable in 1s increments from 1ms to 3,600,000ms. The default setting is 15,000ms.
Timeout between Decodes (Same Barcode)
To enable/disable the Timeout Between Decodes (Same Barcode), scan the appropriate barcode below.
Enable Timeout Between Decodes (Same Barcode):
Do not allow the scanner to re-read the same barcode before
the Timeout Between Decodes (Same Barcode) expires.
Disable Timeout Between Decodes (Same Barcode):
Allow the scanner to re-read the same barcode without
delay.
Disable Timeout Between Decodes (Same Barcode)
** Enable Timeout Between Decodes (Same Barcode)
Set the timeout between decodes (same barcode) to 3,000ms:
1. Scan the
Enter Setup
barcode.
2. Scan the
Timeout Between Decodes (Same Barcode)
barcode.
3. Scan the numeric barcodes “3”, “0”, “0” and “0” from the “Digit Barcodes” section in Appendix.
4. Scan the
Save
barcode from the “Save/Cancel Barcodes” section in Appendix.
5. Scan the
Exit Setup
barcode.
Summary of Contents for HR42 Halibut
